How does radon get into your home?
Radon moves through the soil and can enter homes through:
- The concrete itself: a slab is porous, so radon seeps through it
- Cracks in concrete floors or foundation walls
- Gaps around service pipes and drains
- Sump pits or floor drains
- Construction joints
- Crawl spaces or unfinished basements
Even newer or well-sealed homes can have high radon levels, because modern construction keeps air in more efficiently.
How is radon reduced?
If high radon levels are found, the most effective solution is a radon mitigation system. It stops radon from entering the home by safely redirecting it outside before it can build up indoors.
The most common method is called sub-slab depressurization, or active soil depressurization. A small suction point is drilled through the concrete floor, and a sealed pipe with a quiet, continuous-duty fan, nearly always inside the house, draws radon from beneath the home and vents it out through the side wall. This creates lower pressure under the foundation than inside the home, so radon isn't pulled indoors.
How we do itRadon testing in the Kootenays
Health Canada recommends that all homes be tested for radon, especially in regions like the Kootenays where local soil and geology can contribute to high radon levels.
Because radon levels can vary widely from one home to another, even between neighbouring houses, testing is the only reliable way to know if your home has a problem. Health Canada recommends a long-term test of at least three months (90 days), ideally through fall and winter, to get an accurate average.
Regulations and guidelines
In Canada, radon guidelines are set by Health Canada, which recommends taking action when radon levels are above 200 becquerels per cubic metre (Bq/m³). There's no federal law requiring radon testing or mitigation in private homes, but Health Canada strongly encourages every homeowner to test.
